Search Results

Wall mirrors are reflective surfaces mounted on walls, serving both functional and decorative purposes. They come in various shapes and sizes, from small, decorative pieces to large, full-length mirrors. You'll find wall mirrors in homes, offices, retail stores, and public spaces.

Wall clocks are time-displaying devices that are mounted on a wall. They come in various types, catering to different tastes and functional needs. Analog clocks, with hour, minute, and sometimes second hands, are traditional and widely used. Digital wall clocks display time in a numerical format.

Looking at wall art is a common practice in museums and galleries. Wall art is typically placed at eye level, although when looking at a large piece, the viewer may need to crane their head to look up, down, or side to side to take in the whole piece. People may also look at wall art in shops.

Moulding and trim are decorative wood or composite materials that are used to enhance the appearance of a room. They can be used to add a touch of elegance, sophistication, or warmth to a space. Moulding can also be used to define the space in a room, create a sense of flow, or add visual interest.

A buttress retaining wall is an enhanced structural solution for holding back soil on sloped terrains. It consists of a vertical wall that’s reinforced with support elements, known as buttresses, which extend at right angles or are inclined from the face of the wall. Buttress Retaining Walls are constructed with typical heights of 4’-25’ (1.22-7.62 m), base depths of 2.5’-15’ (.76-4.57 m), and wall thicknesses between 8”-24” (20.1-61 cm). Buttress Retaining Walls are often created with an angle of 2-6 degrees and buttress spacings between 1.5’-11’ (.46-3.35 m). Retaining wall lengths vary as needed.

A counterfort retaining wall is designed for retaining large quantities of soil, particularly in tall structures. Similar to a cantilever retaining wall, it has a vertical face and horizontal base, but with additional vertical concrete webs called counterforts. Counterfort Retaining Walls are constructed with typical heights of 4’-25’ (1.22-7.62 m), base depths of 2.5’-15’ (.76-4.57 m), and wall thicknesses between 8”-24” (20.3-61 cm). Counterfort Retaining Walls are often created with an angle of 2-6 degrees and counterfort spacings between 1.5’-11’ (.46-3.35 m). Retaining wall lengths vary as needed.

An anchored retaining wall is a structure that employs anchoring cables or rods for added stability when holding back soil. These walls are often used in situations with limited space or where a high load is anticipated. The anchors are driven deep into the soil or rock behind the wall. Anchored Retaining Walls are constructed with typical heights of 6’-18’ (1.83-5.49 m) and wall depths of 8”-24” (20.1-61 cm). Retaining wall lengths vary as needed.

The Delta Wall Clock is a unique minimalist design inspired by a sun dial. The Delta Wall Clock does not have any numbers on it, but does have a minute and hour hand. Delta comes in a wood grain look with textures that work with light and give a fun visual with shadows to tell the time of day. The Delta Wall Clock has an overall diameter of 12” (30.5 cm) and depth of 1.38” (3.5 cm).

Wall-climbing vines are a group of flowering plants known for their ability to ascend vertical surfaces using various climbing mechanisms. Found naturally in forests, rocky slopes, and cliffs, these plants have adapted to seek sunlight by growing upward along trees, walls, or other structures.

The Hemisphere Wall Clock has no markings or numbers to indicate the time. The Hemisphere Wall Clock does have a minute, second, and hour hand that keeps track of the time. Consumers can find the Hemisphere Wall Clock with many different designs and backgrounds. The Hemisphere Wall Clock has an overall diameter of 8.85” (22.5 cm) and depth of 3.35” (8.5 cm).

CMU concrete walls are constructed using Concrete Masonry Units (CMUs), also known as concrete blocks or cinder blocks. CMUs are hollow rectangular blocks made from concrete and are assembled on-site with mortar to form walls. This construction method is prized for its versatility. CMU Concrete Walls are constructed with wall depths of 6”-24” (15.2-61 cm) and typical overall wall widths of 12’-32’ | 3.66-9.75 m (Typical). Overall heights for CMU Concrete Walls are commonly between 8’-40’ (2.44-12.2 m).

The Matera Wall Mirror embraces a streamlined design by implementing beveled edges to give the mirror an airy feel. The Matera Wall Mirror was intentionally designed to be hung on a wall to reflect light. The Matera Wall Mirror was designed by Sean Yoo for Design Within Reach. The Matera Wall Mirror has an overall height of 46.75” (118.7 cm), width of 35.5” (90.2 cm), and depth of 2” (5.1 cm).

A crib retaining wall is a gravity retaining structure, usually employed for soil stabilization and erosion control. It consists of interlocking boxes made from precast concrete or timber, forming a crib-like framework. This framework is then filled with granular material. Crib Retaining Walls are constructed with typical heights of 6’-20’ (1.83-6.1 m), overall depths of 2.5’-6.5’ (.76-1.98 m), and block heights between 8”-20” (20.3-50.8 cm). Crib Retaining Walls are often created at an angle of 10-20 degrees and structural spacings between 2.5’-6.5’ (.76-1.98 m). Retaining wall lengths vary as needed.

A gravity retaining wall is a structure designed to hold back soil or loose materials, preventing them from eroding or collapsing. It relies on its own weight to counteract the lateral forces exerted by the retained material. The wall's base is usually wider than the top. Gravity Retaining Walls are constructed with typical heights of 2’-16’ (.61-4.88 m), base depths of 1’-8’ (.3-2.44 m), and wall thicknesses between .5’-5’ (.15-1.52 m). Gravity Retaining Walls are often created at an angle of 6-12 degrees. Retaining wall lengths vary as needed.

A strip wall footing is a continuous foundation that supports a linear structure like a load-bearing wall. Instead of individual footings for columns, the strip wall footing runs the entire length of the wall, distributing the load evenly across a broader surface area. Strip Wall Footings are constructed with typical slab depths between 6”-8” (15-20 cm), footing widths of 12”-24” (30-61 cm), and lengths that vary as needed. Strip Wall Footings are commonly paired with column widths of 6”, 8”, 10” (15, 20, 25 cm).

Wall mounted ramp handrails are handrails used along any accessible ramp that is comprised of walls on one or either side of the run. Wall mounted ramp handrails provide support and stability to individuals walking up or down the ramp. These handrails typically consist of a sturdy, durable material. The Ramp (Handrails Wall) has an overall combined height of 4.17’ (127 cm), total length of 22.33’ (6.81 m), and width of 49.5” (125.7 cm). Dimensions will vary based on the desired slope and height needed. When handrails are attached to a wall, an offset gap of at least 1.5” (3.8 cm) must be continuously maintained between the handrail and the wall surface. In situations where a handrail is not continuous, handrails must extend at least another 12” (30.5 cm) parallel to the flat surface of the ramp landing. Handrails along both sides of a ramp are required on any ramp system with a rise greater than 6” (15.2 cm) or a horizontal run greater than 72” (182.9 cm). The top grippable surface of any ramp handrail must be set at a height between 34”-38” (86.4-96.5 cm) above the ramp surface and a minimum clear width of 36” (91.4 cm) must be provided between handrails. Inner handrails on a switchback or turned ramp must always be continuous.

The Gubi Wall Mirror is a round mirror that is meant to give its surrounding space more depth and light. The Gubi Wall Mirror embraces a timeless design adequate for multiple spaces as it has a soft and elegant form. The Gubi Wall Mirror was designed for Gubi and is created from mirrored glass. The Gubi Wall Mirror has an overall diameter of 43.31" (110 cm) and depth of 2.75” (7 cm).

Single sided walk-in closets are the smallest type of walk-in closets that combine an individual storage wall with an internal clearance space for access. The clear walls of a single sided walk-in closet are often equipped with mirrors or wall-mounted hooks for additional vertical storage. The overall depth of a single sided walk-in closet can vary as desired, but overall closet depths between 4’-5’ (122-152 cm) are commonly used to save space.

The IKEA Bissing Wall Clock is a different kind of design that mounts from the side. Made with renewable plastic, this clock has a quartz movement, making it a great timekeeper. This clock can be yours for just around $25, adding a unique look to your living space, office, or even bedroom! The IKEA Bissing Wall Clock has a height of 11.81” (30 cm), overall width of 12.13” (30.8 cm), and depth of 3.54” (9 cm). The clock has a diameter of 11.02” (28 cm).

The Riki Ring Wall Clock embodies a unique design take on the traditional wall clock by featuring a ring-shaped hour hand. The Riki Ring Wall Clock provides the viewer with a clock that is easy to view and read time. The Riki Ring Wall Clock was designed by Riki Watanabe. The Riki Ring Wall Clock has an overall diameter of 9.8” (24.9 cm) and depth of 2.4” (6.1 cm).

Solid panel concrete walls are prefabricated wall panels made of concrete, used in both residential and commercial construction. These panels are cast in a controlled environment before being transported to the construction site for installation. Solid Panel Concrete Walls are constructed with typical heights between 6’-24’ (1.83-7.32 m), panel widths of 4’-12’ (1.22-3.66 m), and depths of 3.5”-10” (8.9-25.4 cm).

As the name suggests, the Stilo Door Stopper (Wall) is long. As a result, it is ideal if you want to reduce how wide you want your door to open. It is made of brass and designed for the floor. A dome-shaped rubber bumper lies on top of the cylindrical base. The Stilo Door Stopper (Wall) has a diameter of .98” (25 mm) and total length of 2.76” (70 mm).

A standard wall private office layout features a straight desk aligned along a wall, optimizing the use of space while maintaining a professional work environment. This arrangement provides a clear, dedicated workspace, with the wall serving as a backdrop for storage solutions. Standard Wall Private Office layouts have typical room widths between 6’-15’ (1.83-4.57 m) and room depths from 6’6”-9’6” (1.98-2.9 m). These variations of private office layouts have overall floor area between 39-143 ft2 (4-13 m2) with 1 seat.

Cavity brick masonry wall is an innovative construction technique that employs two parallel walls, or "skins", of brickwork, separated by a gap or cavity. The primary objective of this cavity is to prevent moisture penetration from the outer skin to the inner skin, safeguarding against dampness. Cavity Brick Masonry Walls are constructed with typical overall wall depths of 9.25”-10.25” (23.5-26 cm) with a wall cavity of 2”-3” (5.1-7.6 cm). Tie spacings are set a maximum of 36” (91 cm) horizontally and 18” (46 cm) vertically. Overall heights of Cavity Brick Masonry Walls are commonly between 8’-16’ (2.44-4.88 m) with wall lengths of 12’-32’ (3.66-9.75 m).

Through-wall Meridian brick is a type of brick that is designed to be installed through a wall. This allows for the passage of utilities, such as electrical wiring and plumbing, through the wall without the need for additional holes or openings. Through-Wall Meridian Bricks are recognized by their nominal size of 6”, 8” x 4” x 16”. The actual dimensions of Through-Wall Meridian Brick include a width of 15.625” (397 mm), height of 3.625” (92 mm), and depths of 5.625”, 7.625” (143, 194 mm).

A classic-looking design, the IKEA Bravur Wall Clock sits flat against the wall, is battery powered, and contains a quartz movement for precise timekeeping. The Bravur Wall Clock would fit well in a bedroom, living, or office space and is a silent clock that won’t disturb you while sleeping. The IKEA Bravur Wall Clock has an overall diameter of 23.23” (59 cm) and depth of 3.15” (8 cm).

A wall is a vertical structure that encloses a space, defining an area of land. It can be either external or internal. As part of a building, walls carry loads and provide support to roofs, floors, and ceilings. Another purpose of walls are to ensure shelter, security, and soundproofing for users.

Cornice crown moulding is a decorative architectural feature that enhances the intersection of walls and ceilings. It incorporates a cyma recta profile, defined by a convex lower part and a concave upper part, providing an elegant S-shaped curve. Cornice Crown Moulding is available in a variety of sizes with overall heights of 4.625”, 6” (11.7, 15.2 cm) and a depths of 5.16”, 6.7” (13.1, 17 cm). Moulding and trim come in common lengths of 8’, 12’ (2.44, 3.66 m).

A through-wall utility brick is a type of brick that is designed to be installed through a wall. This allows for the passage of utilities, such as electrical wiring and plumbing, through the wall without the need for additional holes or openings. Through-Wall Utility Bricks are recognized by their nominal size of 6”, 8” x 4” x 12”. The actual dimensions of Through-Wall Utility Brick include a width of 11.625” (295 mm), height of 3.625” (92 mm), and depths of 5.625”, 7.625” (143, 194 mm).

A visible glazed curtain wall is a prevalent architectural façade system, where the mullions – the vertical and horizontal framing members – are explicitly exposed, creating a distinct grid pattern on the building's exterior. This design not only provides structural support but also adds a rhythm. Visible Glazed Curtain Walls are constructed with common mullion widths between 2”-6” (5-15 cm), mullion depths of 4”-10” (10-25 cm), and cap depth of .5”-3” (1.3-7.6 cm). Glazed curtain wall panel sizes vary as desired.