Kitchen Sinks

Kitchen Sinks

Description
Description

Kitchen sinks are specialized bowl-shaped plumbing fixtures designed to accommodate and assist with the everyday functions of a kitchen. Primarily used for cleaning vegetables, washing dishes, supplying water, and holding dirty dishes, kitchen sinks come in a range of sizes and designs, from single to double bowls, that cater to a variety of kitchen uses. Kitchen sinks are often made of stainless steel as a means to lower the cost, increase durability, and benefit from the hygienic and corrosion resistant properties of stainless. Kitchen sinks are paired with kitchen faucets and typically installed into the kitchen counter.

History
History

Originally, kitchen tasks were done using bowls or basins, with water fetched from outdoor sources. As plumbing progressed, stationary sinks became integral in homes, often made of cast iron or porcelain. The 20th century introduced stainless steel sinks, renowned for their durability. Double-basin sinks gained popularity, allowing for multitasking. Over time, designs became more varied, accommodating different kitchen styles and needs, from farmhouse sinks to integrated drainboards. Modern kitchen layouts centered around the sink, emphasizing its role in daily life.

Future
Future

Future kitchen sinks will be more than just basins. Innovative materials will make them resistant to scratches, stains, and heat. Smart technology will enable touchless faucets, water-saving features, and even integrated garbage disposals. Multiple compartments and adaptable designs will cater to diverse cooking and cleaning tasks. As kitchens become more eco-friendly, sinks will play a part in waste reduction and recycling. Integration with smart home systems and voice controls will also elevate their convenience and functionality.

Common Questions
Common Questions
How do you install a kitchen sink?

The most important and often most difficult part of installing a kitchen sink is securing the connection to the sink’s drain. To install, figure out the location and mark the area on the counter with precise measurements. Place the sink upside down on the counter, making marks on the center of the sink and the counter and aligning the two. Trace the sink and remove it, making sure the trace is parallel to the edge of the counter. Connect all the markings, but remember to round off the corners. Using a jigsaw piece, cut the traced piece out and remove it. Check the sink fitting and adjust or trim accordingly.

How do you measure a kitchen sink?

Measuring a kitchen sink includes the length, width, and depth— all of which have their own process of being measured. For the length, measure left to right from one edge of the sink to the other with a measuring tape. For the width, measure from the back edge to the front across the sink bowl or basin. For the depth, take a straightedge and place it across the top of the sink. Use a tape measure to measure from the deepest part of the sink to the bottom edge of the straightedge ruler.

How do you unclog a kitchen sink?

The recommended first step to unclogging a kitchen sink is to use a plunger upon the removal of any standing water, but leaving enough to submerge the head. If this method fails to dislodge the clog, boiling water or baking soda can be poured down the drain. If the sink includes a garbage disposal, check if this is the source of the clog issue immediately.

Fixtures

* Under Development *

17.75” | 45 cm
17.75” | 45 cm
IKEA Boholmen Kitchen Sink
45.000
45.000
30
https://p3d.in/e/Kxk0a
GUIDE
3D
IKEA Boholmen Kitchen Sink3D model of the IKEA Boholmen Kitchen Sink viewed in perspective3D model of the IKEA Boholmen Kitchen Sink viewed in perspective
28.875” | 73.3 cm
18” | 45 cm
IKEA Bredsjön Double Bowl Kitchen Sink
73.300
45.000
5
https://p3d.in/e/HPPea
GUIDE
3D
IKEA Bredsjön Double Bowl Kitchen SinkPerspective view of a 3D model of the IKEA Bredsjön Front Apron Double Bowl Kitchen SinkPerspective view of a 3D model of the IKEA Bredsjön Front Apron Double Bowl Kitchen Sink
21.375” | 54.4 cm
18” | 45 cm
IKEA Bredsjön Kitchen Sink
54.400
45.000
5
https://p3d.in/e/Czcwn
GUIDE
3D
IKEA Bredsjön Kitchen SinkView of the IKEA Bredsjön Front Apron Kitchen Sink in 3D available for downloadView of the IKEA Bredsjön Front Apron Kitchen Sink in 3D available for download
18.125” | 46 cm
15.75” | 40 cm
IKEA Fyndig Kitchen Sink
46.000
40.000
10
https://p3d.in/e/mdoMW
GUIDE
3D
IKEA Fyndig Kitchen Sink3D model of the IKEA Fyndig Kitchen Sink viewed in perspective3D model of the IKEA Fyndig Kitchen Sink viewed in perspective
37” | 93 cm
19” | 48 cm
IKEA Havsen Double Bowl Kitchen Sink
93.000
48.000
150
https://p3d.in/e/aTFmV
GUIDE
3D
IKEA Havsen Double Bowl Kitchen SinkView of the IKEA Havsen Front Apron Double Bowl Kitchen Sink in 3D available for downloadView of the IKEA Havsen Front Apron Double Bowl Kitchen Sink in 3D available for download
24.375” | 62 cm
19” | 48 cm
IKEA Havsen Front Apron Kitchen Sink
62.000
48.000
150
https://p3d.in/e/PT3QR
GUIDE
3D
IKEA Havsen Front Apron Kitchen Sink3D model of the IKEA Havsen Front Apron Kitchen Sink viewed in perspective3D model of the IKEA Havsen Front Apron Kitchen Sink viewed in perspective
20.875” | 53 cm
18.5” | 47 cm
IKEA Havsen Kitchen Sink
53.000
47.000
150
https://p3d.in/e/RO0CX
GUIDE
3D
IKEA Havsen Kitchen SinkPerspective view of a 3D model of the IKEA Havsen Kitchen SinkPerspective view of a 3D model of the IKEA Havsen Kitchen Sink
22.375”-29.5” | 58-75 cm
18.125” | 46 cm
IKEA Hillesjön 1.5 Bowl Kitchen Sink
75.000
46.000
5
https://p3d.in/e/J6cfi
GUIDE
3D
IKEA Hillesjön 1.5 Bowl Kitchen SinkPerspective view of a 3D model of the IKEA Hillesjön 1.5 Dual Mount Small Large Kitchen SinkPerspective view of a 3D model of the IKEA Hillesjön 1.5 Dual Mount Small Large Kitchen Sink
29.5” | 75 cm
18.125” | 46 cm
IKEA Hillesjön Double Bowl Kitchen Sink
75.000
46.000
5
https://p3d.in/e/hqk13
GUIDE
3D
IKEA Hillesjön Double Bowl Kitchen Sink3D model of the IKEA Hillesjön Double Bowl Top Mount Kitchen Sink viewed in perspective3D model of the IKEA Hillesjön Double Bowl Top Mount Kitchen Sink viewed in perspective
22” | 56 cm
19.625” | 50 cm
IKEA Hällviken Kitchen Sink
56.000
50.000
5
https://p3d.in/e/FyoQd
GUIDE
3D
IKEA Hällviken Kitchen SinkView of the IKEA Hällviken Kitchen Sink in 3D available for downloadView of the IKEA Hällviken Kitchen Sink in 3D available for download
29.5” | 75 cm
20.625” | 53 cm
IKEA Långudden Double Bowl Kitchen Sink
75.000
53.000
5
https://p3d.in/e/ArfeH
GUIDE
3D
IKEA Långudden Double Bowl Kitchen SinkPerspective view of a 3D model of the IKEA Långudden Double Bowl Top Mount Kitchen SinkPerspective view of a 3D model of the IKEA Långudden Double Bowl Top Mount Kitchen Sink
22” | 56 cm
20.625” | 53 cm
IKEA Långudden Kitchen Sink
56.000
53.000
5
https://p3d.in/e/wBI5K
GUIDE
3D
IKEA Långudden Kitchen SinkView of the IKEA Långudden Kitchen Sink in 3D available for downloadView of the IKEA Långudden Kitchen Sink in 3D available for download
28.75” | 73 cm
17.25” | 44 cm
IKEA Norrsjön Double Bowl Kitchen Sink
73.000
44.000
30
https://p3d.in/e/ppRle
GUIDE
3D
IKEA Norrsjön Double Bowl Kitchen SinkPerspective view of a 3D model of the IKEA Norrsjön Double Bowl Top Mount Kitchen SinkPerspective view of a 3D model of the IKEA Norrsjön Double Bowl Top Mount Kitchen Sink
14.625”-28.875” | 37-73 cm
17.25” | 44 cm
IKEA Norrsjön Kitchen Sink
73.000
44.000
30
https://p3d.in/e/NyzES
GUIDE
3D
IKEA Norrsjön Kitchen SinkView of the IKEA Norrsjön Kitchen Sink Small Medium Large in 3D available for downloadView of the IKEA Norrsjön Kitchen Sink Small Medium Large in 3D available for download
8” | 21 cm
17.25” | 44 cm
IKEA Norrsjön Single Bowl Kitchen Sink
21.000
44.000
30
https://p3d.in/e/OJmVW
GUIDE
3D
IKEA Norrsjön Single Bowl Kitchen Sink3D model of the IKEA Norrsjön Single Bowl Dual Mount Kitchen Sink viewed in perspective3D model of the IKEA Norrsjön Single Bowl Dual Mount Kitchen Sink viewed in perspective
27.125” | 69 cm
18.5” | 47 cm
IKEA Vattudalen Kitchen Sink
69.000
47.000
5
https://p3d.in/e/tm33R
GUIDE
3D
IKEA Vattudalen Kitchen Sink3D model of the IKEA Vattudalen Single Bowl Top Mount Kitchen Sink viewed in perspective3D model of the IKEA Vattudalen Single Bowl Top Mount Kitchen Sink viewed in perspective
IKEA Hillesjön 1.5 Bowl Dual Mount Kitchen Sink
Style and size comparison drawing of the IKEA Hillesjön 1.5 Dual Mount Small Large Kitchen Sink compared to other sinks

The IKEA Hillesjön 1.5 Dual Mount Kitchen Sink is a two-bowl sink that either is glued or insert into a countertop. The sink is reversible so you can use the large bowl on the left or right, and the small bowl allows you to use less water when you wash dishes or provide a small section for rinsing dishes.

The IKEA Hillesjön 1.5 Dual Mount Kitchen Sink comes in small and large sizes with overall widths from 22.375”-29.5” (58-75 cm) and shared common depths of 18.125” (46 cm). The inner bowls of the IKEA Hillesjön 1.5 Dual Mount Kitchen Sink have depths from 4.75”-7.125” (12-18 cm).

Drawings for the small and large versions of the IKEA Hillesjön 1.5 Bowl Kitchen Sink with dimensions
The IKEA Hillesjön 1.5 Dual Mount Kitchen Sink is a two-bowl sink that either is glued or insert into a countertop. The sink is reversible so you can use the large bowl on the left or right, and the small bowl allows you to use less water when you wash dishes or an area for rinsing dishes.

The IKEA Hillesjön 1.5 Dual Mount Kitchen Sink comes in small and large sizes with overall widths from 22.375”-29.5” (58-75 cm) and shared common depths of 18.125” (46 cm). The inner bowls of the IKEA Hillesjön 1.5 Dual Mount Kitchen Sink have depths from 4.75”-7.125” (12-18 cm).

Drawings for the small and large versions of the IKEA Hillesjön 1.5 Bowl Kitchen Sink with dimensions
IKEA Hillesjön 1.5 Bowl Dual Mount Kitchen Sink
Height:
Width:
22.375”-29.5” | 58-75 cm
Length:
Depth:
18.125” | 46 cm
Bowl Depth
4.75”-7.125” | 12-18 cm
Weight:
Area:

Large:
Width (Overall): 29 1/2” | 75 cm
Front to Back (Overall): 18 1/8” | 46 cm
Width (Large Bowl): 19 5/8” | 50 cm
Width (Half Bowl): 6 1/4” | 16 cm
Front to Back (Bowls): 15 3/4” | 40 cm
Depth (Large Bowl): 7 1/8” | 18 cm
Depth (Half Bowl): 4 3/4” | 12 cm

Small:
Width (Overall): 22 3/8” | 58 cm
Front to Back (Overall): 18 1/8” | 46 cm
Width (Large Bowl): 13” | 33 cm
Width (Half Bowl): 6 1/4” | 16 cm
Front to Back (Bowls): 15 3/4” | 40 cm
Depth (Large Bowl): 7 1/8” | 18 cm
Depth (Half Bowl): 4 3/4” | 12 cm

Materials
Stainless steel
Designer
IKEA

Drawings include:
IKEA Hillesjön 1.5 Bowl Dual Mount Kitchen Sink front elevation, side, plan, plan (person and counter)

Downloads

2D Downloads

3D Downloads

IKEA Fyndig Kitchen Sink
Comparison drawing of the IKEA Fyndig Kitchen Sink compared to other kitchen sinks

The IKEA Fyndig Kitchen Sink is a rectangular-shaped sink with smooth edges and a sound-absorbing material under the sink to lower the sound level when using the sink. As a single bowl top mount sink, it is ideal for a kitchen or a repair shop and does not corrode when it comes into contact with mineral/solvent spirits.

The IKEA Fyndig Kitchen Sink has an overall width of 18.125” (46 cm) and depth of 15.75” (40 cm). The inner bowl of the IKEA Fyndig Kitchen Sink is 15.75” (40 cm) wide, 13.375” (34 cm) from front to back, and 5.875” (15 cm) deep.

Plan and elevation illustrations with dimensions of the IKEA Fyndig Kitchen Sink
The IKEA Fyndig Kitchen Sink is a rectangular-shaped sink with smooth edges and a sound-absorbing material under the sink to lower the sound level when using the sink. As a single bowl top mount sink, it is ideal for a kitchen or a repair shop and does not corrode.

The IKEA Fyndig Kitchen Sink has an overall width of 18.125” (46 cm) and depth of 15.75” (40 cm). The inner bowl of the IKEA Fyndig Kitchen Sink is 15.75” (40 cm) wide, 13.375” (34 cm) from front to back, and 5.875” (15 cm) deep.

Plan and elevation illustrations with dimensions of the IKEA Fyndig Kitchen Sink
IKEA Fyndig Kitchen Sink
Height:
Width:
18.125” | 46 cm
Length:
Depth:
15.75” | 40 cm
Bowl Depth
5.875” | 15 cm
Weight:
Area:

Width (Bowl): 15.75” | 40 cm
Front to Back (Bowl): 13.375” | 34 cm

Materials
Stainless steel
Designer
IKEA

Drawings include:
IKEA Fyndig Kitchen Sink front elevation, side, plan, plan (person and counter)

Downloads

2D Downloads

3D Downloads

IKEA Norrsjön Double Bowl Top Mount Kitchen Sink
Style and size comparison drawing of the IKEA Norrsjön Double Bowl Top Mount Kitchen Sink compared to other kitchen sinks

The IKEA Norrsjön two Bowl Top Mount Kitchen Sink is a design of P Brickstad, A Palleschitz, P Petersén, and IKEA of Sweden having a LILLVIKEN strainer and a LILLVIKEN lid included for practical use. The LILLVIKEN lid gives this two-bowl sink a smooth surface and clean design while maintaining its style.

The IKEA Norrsjön Double Bowl Top Mount Kitchen Sink has an overall width of 28.75” (73 cm) and depth of 17.25” (44 cm). The inner bowl of the IKEA Norrsjön Double Bowl Top Mount Kitchen Sink is 13” (33 cm) wide, 15.75” (40 cm) from front to back, and 7.5” (19 cm) deep.

Dimensioned drawings of the IKEA Norrsjön Double Bowl Kitchen Sink measuring widths and depths
The IKEA Norrsjön two Bowl Top Mount Kitchen Sink is a design of P Brickstad, A Palleschitz, P Petersén, and IKEA of Sweden having a LILLVIKEN strainer and a LILLVIKEN lid included for practical use. The LILLVIKEN lid gives this two-bowl sink a smooth surface and clean stylish design.

The IKEA Norrsjön Double Bowl Top Mount Kitchen Sink has an overall width of 28.75” (73 cm) and depth of 17.25” (44 cm). The inner bowl of the IKEA Norrsjön Double Bowl Top Mount Kitchen Sink is 13” (33 cm) wide, 15.75” (40 cm) from front to back, and 7.5” (19 cm) deep.

Dimensioned drawings of the IKEA Norrsjön Double Bowl Kitchen Sink measuring widths and depths
IKEA Norrsjön Double Bowl Top Mount Kitchen Sink
Height:
Width:
28.75” | 73 cm
Length:
Depth:
17.25” | 44 cm
Bowl Depth
7.5” | 19 cm
Weight:
Area:

Width (Bowl): 13” | 33 cm
Front to Back (Bowl): 15.75” | 40 cm

Materials
Stainless steel
Designer
Brickstad/Palleschitz/Petersén (IKEA)

Drawings include:
IKEA Norrsjön Double Bowl Top Mount Kitchen Sink front elevation, side, plan, plan (person and counter)

Downloads

2D Downloads

3D Downloads

IKEA Havsen Kitchen Sink
Style and size comparison drawing of the IKEA Havsen Kitchen Sink compared to other kitchen sinks

The IKEA Havsen Kitchen Sink is an innovation of Nike Karlsson and IKEA of Sweden sporting a single insert ceramic bowl with soft rounded corners for an easy clean. The kitchen sink provides an option to add a water trap and a strainer connection for a washing machine or dishwasher.

The IKEA Havsen Kitchen Sink has an overall width of 20.875” (53 cm( and depth of 18.5” (47 cm). The inner bowl of the IKEA Havsen Kitchen Sink is 18.5” (47 cm) wide, 15.75” (40 cm) from front to back, and 7.875” (20 cm) deep.

Elevation and plan drawings of the IKEA Havsen Kitchen Sink with dimensions
The IKEA Havsen Kitchen Sink is an innovation of Nike Karlsson and IKEA of Sweden sporting a single insert ceramic bowl with soft rounded corners for an easy clean. The kitchen sink provides an option to add a water trap and a strainer connection for a washing machine or dishwasher.

The IKEA Havsen Kitchen Sink has an overall width of 20.875” (53 cm( and depth of 18.5” (47 cm). The inner bowl of the IKEA Havsen Kitchen Sink is 18.5” (47 cm) wide, 15.75” (40 cm) from front to back, and 7.875” (20 cm) deep.

Elevation and plan drawings of the IKEA Havsen Kitchen Sink with dimensions
IKEA Havsen Kitchen Sink
Height:
Width:
20.875” | 53 cm
Length:
Depth:
18.5” | 47 cm
Bowl Depth
7.875” | 20 cm
Weight:
Area:

Width (Bowl): 18.5” | 47 cm
Front to Back (Bowl): 15.75” | 40 cm

Materials
Ceramic
Designer
Nike Karlsson (IKEA)

Drawings include:
IKEA Havsen Kitchen Sink front elevation, side, plan, plan (person and counter)

Downloads

2D Downloads

3D Downloads

IKEA Långudden Kitchen Sink
Scale illustration of the IKEA Långudden Kitchen Sink compared to other kitchen sinks

The IKEA Långudden Kitchen Sink is a rectangular-shaped single bowl insert sink with rounded corners on the top and bottom surface and a pre-drilled hole for adding a kitchen faucet. The back edge of the sink is slightly deeper, offering space to place kitchen items like detergents or brush.

The IKEA Långudden Kitchen Sink has an overall width of 22” (56 cm) and depth of 20.625” (53 cm). The inner bowl of the IKEA Långudden Kitchen Sink is 19.625” (50 cm) wide, 15.75” (40 cm) from front to back, and 7.125” (18 cm) deep.

Collection of drawings of the IKEA Långudden Kitchen Sink measuring widths and depths
The IKEA Långudden Kitchen Sink is a rectangular-shaped single bowl insert sink with rounded corners on the top and bottom surface and a pre-drilled hole for adding a kitchen faucet. The back edge of the sink is slightly deeper, offering space to place kitchen items like detergents or brush.

The IKEA Långudden Kitchen Sink has an overall width of 22” (56 cm) and depth of 20.625” (53 cm). The inner bowl of the IKEA Långudden Kitchen Sink is 19.625” (50 cm) wide, 15.75” (40 cm) from front to back, and 7.125” (18 cm) deep.

Collection of drawings of the IKEA Långudden Kitchen Sink measuring widths and depths
IKEA Långudden Kitchen Sink
Height:
Width:
22” | 56 cm
Length:
Depth:
20.625” | 53 cm
Bowl Depth
7.125” | 18 cm
Weight:
Area:

Width (Bowl): 19.625” | 50 cm
Front to Back (Bowl): 15.75” | 40 cm

Materials
Stainless steel
Designer
IKEA

Drawings include:
IKEA Långudden Kitchen Sink front elevation, side, plan, plan (person and counter)

Downloads

2D Downloads

3D Downloads