The Butt Door Hinge is a hinge consisting of two plates, one attached to the door and the other attached to the frame. These plates are connected by a pin, which allows the door to rotate around it. The hinge plates have knuckles that form the pivot point when the hinge is in use. The hinge is designed to mount on the surface of the door and frame. Because of its simple design, it has a low failure rate, making it a reliable and long-lasting hinge. However, it has a limited range of motion and is not suitable for doors that need to open at a wide angle or in both directions. They are commonly used for interior and exterior doors in residential and commercial settings.
The Butt Door Hinge (Round) has a leaf height of 3.46” (88 mm), open width of 3.46” (88 mm), and depth of .47” (12 mm). The overall pin height is 3.62” (92 mm) and the closed width is 1.97” (50 mm).
The Butt Door Hinge is a hinge consisting of two plates, one attached to the door and the other attached to the frame. These plates are connected by a pin, which allows the door to rotate around it. The hinge plates have knuckles that form the pivot point when the hinge is in use. The hinge is designed to mount on the surface of the door and frame. Because of its simple design, it has a low failure rate, making it a reliable and long-lasting hinge. However, it has a limited range of motion and is not suitable for doors that need to open at a wide angle or in both directions. They are commonly used for interior and exterior doors in residential and commercial settings.
The Butt Door Hinge (Round) has a leaf height of 3.46” (88 mm), open width of 3.46” (88 mm), and depth of .47” (12 mm). The overall pin height is 3.62” (92 mm) and the closed width is 1.97” (50 mm).
Accessible reach ranges from a maximum of 54” (137 cm) to a lower point 15” (38 cm) from the floor.
