IKEA Sektion Wall Cabinet - 1 Door

The IKEA Sektion Wall Cabinet (1 Door) can be mounted to open either left or right and its highly customizable as the shelves can be adjusted. This standard wall cabinet can be used anywhere like a kitchen, laundry room, or even a garage.

The IKEA Sektion Wall Cabinet (1 Door) has heights of 15”, 20”, 30”, 40” (38.1, 50.8, 76.2, 101.6 cm), widths of 12”, 15”, 18”, 21”, 24” (30.5, 38.1, 45.7, 53.3, 61 cm), and depth of 15.5” (39.4 cm).

Dimensioned elevation and plan drawings of the IKEA Sektion Wall Cabinet (1 Door) with height, width and depth measurements

Group of elevation illustrations of the IKEA Sektion Wall Cabinet (1 Door) labeled with the variety of available widths

How deep are kitchen cabinets?

A standard base cabinet has a depth of 24 inches (61 cm). Cabinets located on the upper wall usually have a depth range of 12 to 24 inches (30.5-61 cm). Although these are the standard sizes, cabinets at a depth of up to 36 inches (91.4 cm) are also available.

How do you install kitchen cabinets?

To install kitchen cabinets, attach a support board to marked studs located on the wall. The doors and hardware of the cabinets do not need to be on at this point (their absence makes installation easier). Secure the cabinets together, make sure they are flush via clamps, and then screw them together at the stile. Lift the cabinets onto the support board. The last step of installation is to drill the cabinet frame into the wall studs and attach the cabinet into the appropriate position with screws.

How do you remove kitchen cabinets?

To remove kitchen cabinets, detach any molding and unscrew the cabinet from the soffit or ledger board. Take away all the cabinets and drawers and break the seal or caulking between the counter backsplash and wall. The countertop should be able to lift up from the cabinet.

How deep are kitchen cabinets?

How do you install kitchen cabinets?

How do you remove kitchen cabinets?

What are kitchen fixtures?

Kitchen fixtures are appliances secured to the kitchen for both cooking and food preparation in a household or commercial environment. Examples of kitchen fixtures include kitchen faucets, sinks, kitchen islands and carts, microwaves, and ovens. Other kitchen fixtures are kitchen oven hoods, sink drains, water tanks, garbage disposals, tables, and wine racks.

How do you select kitchen light fixtures?

When selecting a kitchen light fixture incorporate task, accent, and decorative lighting. Start with function making sure to place lighting above the kitchen island, kitchen sink, and any eat-in areas in your kitchen. Then move to accent and decorative lighting choosing the finish and shades of lighting fixtures. Be sure to choose lighting fixtures fit to the size of your kitchen.

Which kitchen fixtures require ventilation?

Kitchen fixtures that require ventilation are ranges. They need ventilation through a range hood as they are designed to remove odors and contaminants that may be released while cooking. The range hood is typically only turned on when something is burning. It is important to vent a range to the outside as health damaging particles are released when cooking.

What are kitchen fixtures?

How do you select kitchen light fixtures?

Which kitchen fixtures require ventilation?

3D model of the IKEA Sektion Wall Cabinet (1 Door) viewed in perspective

Details

Under Development

Height:

15”, 20”, 30”, 40” | 38.1, 50.8, 76.2, 101.6 cm

Width:

12”, 15”, 18”, 21”, 24” | 30.5, 38.1, 45.7, 53.3, 61 cm

Depth:

15.5” | 39.4 cm

Length:

Height (Frame):

Height (Toe Kick):

Weight:

Area:

Materials:

Particleboard frame, shelves, front; fiberboard back; steel rails and hinges

Designer:

IKEA

Properties

Drawings include:
IKEA Sektion Wall Cabinet - 1 Door (Multiple Sizes) front elevation, side, plan

Links

IKEA - Sektion Wall Cabinet - 1 Door

Wikipedia - Kitchen Cabinet

Related Collections

Related Tags

2D Downloads

For 2D Downloads of this element, upgrade to a Dimensions Pro Membership. Available in DWG (CAD, Imperial & Metric), SVG, JPG formats

For 2D Downloads of this element, renew your Dimensions Pro Membership. Available in DWG (CAD, Imperial & Metric), SVG, JPG formats

3D Downloads

For 3D Downloads of this element, upgrade to a Dimensions Pro Membership. Available in 3DM (Rhino), OBJ (NURB), SKP (Sketchup) formats

For 3D Downloads of this element, renew your Dimensions Pro Membership. Available in 3DM (Rhino), OBJ (NURB), SKP (Sketchup) formats

Ad Blocker

Enjoy free drawings? We do too!
Advertising helps fund our work.
Please support the project by disabling
or whitelisting your ad blocker while browsing Dimensions.Guide. Thanks!