Surface Mounted Door - Bypassing Stacked, Solid, Flush
Surface Mounted Door - Bypassing Stacked, Solid, Flush
A flush bypassing stacked surface mounted sliding door is a type of door that consists of two or more door panels that slide horizontally in front of and behind each other, with each panel overlapping the previous panel slightly. When fully open, the panels are stacked on top of each other to create maximum clearance of the opening.
The door is installed on the surface of a wall or opening, and is typically mounted on a track above or below the opening. The flush design creates a modern and streamlined look, and the door is operated by a handle or pull. This type of door is commonly used in interior spaces where space is limited, and a traditional swinging door is not practical or desired.
Bypassing Stacked Flush Surface Mounted Doors are available in a range of sizes based on the door opening. Typical door panel widths for surface mounted sliding doors are between 36”-52” (.91-1.32 m), with common heights of 7’-8’ (2.13-2.44 m), and a typical door depth of 1.375” (3.5 cm). When installed with the track system, the overall width is between 8’10”-12’10” (2.69-3.91 m), height of 7’7”-8’7” (2.32-2.63 m), and total depth of 5” (12.7 cm).
A flush bypassing stacked surface mounted sliding door is a type of door that consists of two or more door panels that slide horizontally in front of and behind each other, with each panel overlapping the previous panel slightly. When fully open, the panels are stacked on top of each other to create maximum clearance of the opening.
The door is installed on the surface of a wall or opening, and is typically mounted on a track above or below the opening. The flush design creates a modern and streamlined look, and the door is operated by a handle or pull. This type of door is commonly used in interior spaces where space is limited, and a traditional swinging door is not practical or desired.
Bypassing Stacked Flush Surface Mounted Doors are available in a range of sizes based on the door opening. Typical door panel widths for surface mounted sliding doors are between 36”-52” (.91-1.32 m), with common heights of 7’-8’ (2.13-2.44 m), and a typical door depth of 1.375” (3.5 cm). When installed with the track system, the overall width is between 8’10”-12’10” (2.69-3.91 m), height of 7’7”-8’7” (2.32-2.63 m), and total depth of 5” (12.7 cm).
