Drawing of an Escalator with dimensions showing required height clearances, lengths, and depths

Escalators are a form of vertical building transportation designed as a staircase that moves with the assistance of a motor-driven mechanism. Escalators are used to connect floors with an angle of rise between 30°-35°. The entire length of an escalator must also provide enough space for a lower zone of mechanical equipment along with a structural truss that averages around 3’8” (1.12 m) deep. Both ends of an escalator require structural supports and may also require intermediate supports depending on the length of the run.

Escalators cannot be used to meet building requirements for fire exits. When specifying an escalator installation, consult directly with the manufacturer for accurate sizes, capacity calculations, speeds, and structural requirements.

For the safety of users, escalators must incorporate 3’ (.91 m) handrails and preserve a minimum vertical headroom clearance of 7’6” (2.29 m). Adequate space should be provided at each loading or discharge platform of an escalator for easy queuing and waiting at peak hours—typically 7’6” (2.29 m) at the bottom and 8’ (2.44 m) at the top.


*Under Development*


Angle of Rise: 30°-35°
Height (Handrail):
3’ | .91 m
Clearance (Headroom): 7’6” | 2.29 m minimum
Landing Length (Bottom): 7’6” | 2.29 m
Landing Length (Top): 8’ | 2.44 m
Depth (Truss): 3’8” | 1.12 m



Drawings include:
Escalator side elevation, side (people)

Related Collections

Ad Blocker
Enjoy free drawings? We do too! 
Advertising helps fund our work.
Please support the project by disabling
or whitelisting your ad blocker while browsing Dimensions.Guide. Thanks!

Escalators are continuously circulating motorized stairways that move people between floors of a building. Often used in conjunction with elevators, escalators provide a convenient, efficient, and comfortable means of travel for people needing to ascend or descend through limited sets of levels.

Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.