Search Results

Moulding and trim are decorative wood or composite materials that are used to enhance the appearance of a room. They can be used to add a touch of elegance, sophistication, or warmth to a space. Moulding can also be used to define the space in a room, create a sense of flow, or add visual interest.

Looking at wall art is a common practice in museums and galleries. Wall art is typically placed at eye level, although when looking at a large piece, the viewer may need to crane their head to look up, down, or side to side to take in the whole piece. People may also look at wall art in shops.

Wall clocks are time-displaying devices that are mounted on a wall. They come in various types, catering to different tastes and functional needs. Analog clocks, with hour, minute, and sometimes second hands, are traditional and widely used. Digital wall clocks display time in a numerical format.

Wall mirrors are reflective surfaces mounted on walls, serving both functional and decorative purposes. They come in various shapes and sizes, from small, decorative pieces to large, full-length mirrors. You'll find wall mirrors in homes, offices, retail stores, and public spaces.

CMU concrete walls are constructed using Concrete Masonry Units (CMUs), also known as concrete blocks or cinder blocks. CMUs are hollow rectangular blocks made from concrete and are assembled on-site with mortar to form walls. This construction method is prized for its versatility. CMU Concrete Walls are constructed with wall depths of 6”-24” (15.2-61 cm) and typical overall wall widths of 12’-32’ | 3.66-9.75 m (Typical). Overall heights for CMU Concrete Walls are commonly between 8’-40’ (2.44-12.2 m).

The Matera Wall Mirror embraces a streamlined design by implementing beveled edges to give the mirror an airy feel. The Matera Wall Mirror was intentionally designed to be hung on a wall to reflect light. The Matera Wall Mirror was designed by Sean Yoo for Design Within Reach. The Matera Wall Mirror has an overall height of 46.75” (118.7 cm), width of 35.5” (90.2 cm), and depth of 2” (5.1 cm).

A crib retaining wall is a gravity retaining structure, usually employed for soil stabilization and erosion control. It consists of interlocking boxes made from precast concrete or timber, forming a crib-like framework. This framework is then filled with granular material. Crib Retaining Walls are constructed with typical heights of 6’-20’ (1.83-6.1 m), overall depths of 2.5’-6.5’ (.76-1.98 m), and block heights between 8”-20” (20.3-50.8 cm). Crib Retaining Walls are often created at an angle of 10-20 degrees and structural spacings between 2.5’-6.5’ (.76-1.98 m). Retaining wall lengths vary as needed.

A gravity retaining wall is a structure designed to hold back soil or loose materials, preventing them from eroding or collapsing. It relies on its own weight to counteract the lateral forces exerted by the retained material. The wall's base is usually wider than the top. Gravity Retaining Walls are constructed with typical heights of 2’-16’ (.61-4.88 m), base depths of 1’-8’ (.3-2.44 m), and wall thicknesses between .5’-5’ (.15-1.52 m). Gravity Retaining Walls are often created at an angle of 6-12 degrees. Retaining wall lengths vary as needed.

The Hemisphere Wall Clock has no markings or numbers to indicate the time. The Hemisphere Wall Clock does have a minute, second, and hour hand that keeps track of the time. Consumers can find the Hemisphere Wall Clock with many different designs and backgrounds. The Hemisphere Wall Clock has an overall diameter of 8.85” (22.5 cm) and depth of 3.35” (8.5 cm).

Wall-climbing vines are a group of flowering plants known for their ability to ascend vertical surfaces using various climbing mechanisms. Found naturally in forests, rocky slopes, and cliffs, these plants have adapted to seek sunlight by growing upward along trees, walls, or other structures.

The Delta Wall Clock is a unique minimalist design inspired by a sun dial. The Delta Wall Clock does not have any numbers on it, but does have a minute and hour hand. Delta comes in a wood grain look with textures that work with light and give a fun visual with shadows to tell the time of day. The Delta Wall Clock has an overall diameter of 12” (30.5 cm) and depth of 1.38” (3.5 cm).

An anchored retaining wall is a structure that employs anchoring cables or rods for added stability when holding back soil. These walls are often used in situations with limited space or where a high load is anticipated. The anchors are driven deep into the soil or rock behind the wall. Anchored Retaining Walls are constructed with typical heights of 6’-18’ (1.83-5.49 m) and wall depths of 8”-24” (20.1-61 cm). Retaining wall lengths vary as needed.

A buttress retaining wall is an enhanced structural solution for holding back soil on sloped terrains. It consists of a vertical wall that’s reinforced with support elements, known as buttresses, which extend at right angles or are inclined from the face of the wall. Buttress Retaining Walls are constructed with typical heights of 4’-25’ (1.22-7.62 m), base depths of 2.5’-15’ (.76-4.57 m), and wall thicknesses between 8”-24” (20.1-61 cm). Buttress Retaining Walls are often created with an angle of 2-6 degrees and buttress spacings between 1.5’-11’ (.46-3.35 m). Retaining wall lengths vary as needed.

A counterfort retaining wall is designed for retaining large quantities of soil, particularly in tall structures. Similar to a cantilever retaining wall, it has a vertical face and horizontal base, but with additional vertical concrete webs called counterforts. Counterfort Retaining Walls are constructed with typical heights of 4’-25’ (1.22-7.62 m), base depths of 2.5’-15’ (.76-4.57 m), and wall thicknesses between 8”-24” (20.3-61 cm). Counterfort Retaining Walls are often created with an angle of 2-6 degrees and counterfort spacings between 1.5’-11’ (.46-3.35 m). Retaining wall lengths vary as needed.

A strip wall footing is a continuous foundation that supports a linear structure like a load-bearing wall. Instead of individual footings for columns, the strip wall footing runs the entire length of the wall, distributing the load evenly across a broader surface area. Strip Wall Footings are constructed with typical slab depths between 6”-8” (15-20 cm), footing widths of 12”-24” (30-61 cm), and lengths that vary as needed. Strip Wall Footings are commonly paired with column widths of 6”, 8”, 10” (15, 20, 25 cm).

The Gubi Wall Mirror is a round mirror that is meant to give its surrounding space more depth and light. The Gubi Wall Mirror embraces a timeless design adequate for multiple spaces as it has a soft and elegant form. The Gubi Wall Mirror was designed for Gubi and is created from mirrored glass. The Gubi Wall Mirror has an overall diameter of 43.31" (110 cm) and depth of 2.75” (7 cm).

Wall mounted ramp handrails are handrails used along any accessible ramp that is comprised of walls on one or either side of the run. Wall mounted ramp handrails provide support and stability to individuals walking up or down the ramp. These handrails typically consist of a sturdy, durable material. The Ramp (Handrails Wall) has an overall combined height of 4.17’ (127 cm), total length of 22.33’ (6.81 m), and width of 49.5” (125.7 cm). Dimensions will vary based on the desired slope and height needed. When handrails are attached to a wall, an offset gap of at least 1.5” (3.8 cm) must be continuously maintained between the handrail and the wall surface. In situations where a handrail is not continuous, handrails must extend at least another 12” (30.5 cm) parallel to the flat surface of the ramp landing. Handrails along both sides of a ramp are required on any ramp system with a rise greater than 6” (15.2 cm) or a horizontal run greater than 72” (182.9 cm). The top grippable surface of any ramp handrail must be set at a height between 34”-38” (86.4-96.5 cm) above the ramp surface and a minimum clear width of 36” (91.4 cm) must be provided between handrails. Inner handrails on a switchback or turned ramp must always be continuous.

Single sided walk-in closets are the smallest type of walk-in closets that combine an individual storage wall with an internal clearance space for access. The clear walls of a single sided walk-in closet are often equipped with mirrors or wall-mounted hooks for additional vertical storage. The overall depth of a single sided walk-in closet can vary as desired, but overall closet depths between 4’-5’ (122-152 cm) are commonly used to save space.

Cornice crown moulding is a decorative architectural feature that enhances the intersection of walls and ceilings. It incorporates a cyma recta profile, defined by a convex lower part and a concave upper part, providing an elegant S-shaped curve. Cornice Crown Moulding is available in a variety of sizes with overall heights of 4.625”, 6” (11.7, 15.2 cm) and a depths of 5.16”, 6.7” (13.1, 17 cm). Moulding and trim come in common lengths of 8’, 12’ (2.44, 3.66 m).

Door framed steel walls involve creating an opening within a steel-framed wall to install a door. The steel framing members around the door opening are typically composed of a header at the top, cripple studs above the header, king studs on the sides, and a sill or threshold at the bottom. Steel Wall Door Frames are constructed with 2.5” (6.4 cm) added to the height of the door opening and 1” (2.5 cm) added to each side of the door opening. Steel Walls are built with stud depths of 3.625”, 5.5” (9.2, 14 cm), stud spacings of 12”, 16”, 24” (30.5, 40.6, 61 cm), and common overall heights of 8’-12’ (2.44-3.66 m).

E steel wall headers employ a unique box-shaped configuration with two additional flanges extending from one side, resembling the letter "E". These headers are used above wall openings like windows and doors to provide structural support. The box section imparts rigidity and strength. E-Header Steel Walls have header heights of 3.63”, 5.5”, 7.5” (9.2, 14, 19.1 cm). Steel framed walls are typically constructed with stud depths of 3.625”, 5.5” (9.2, 14 cm) and stud spacings of 12”, 16”, 24” (30.5, 40.6, 61 cm).

Standing Wall Split Pose is an advanced posture that uses the wall as a prop for the full expression. The wall in Standing Wall Split Pose not only can help with balance but is meant to keep the Yogi mindful of alignment. Yogis with wrist, shoulder or hip issues use caution. To do Standing Wall Split Pose, the Yogi will start in a forward fold with the back of the legs against the wall. Next, lean forward on the hands and lift the left leg up the wall, then move back and work to have the legs flat against the wall with one leg on the mat.

The Station Wall Clock was intentionally designed to be easy to read by implementing large and clear numbers. The Station Wall Clock embodies a classic design that makes it adequate for both residential and commercial spaces. The Station Wall Clock was designed by Arne Jacobsen for Lauritz Knudsen. The Station Wall Clock (Large) has an overall diameter of 19” (48.3 cm) and depth of 3” (7.6 cm).

A solid brick masonry wall is a timeless construction method that employs densely packed bricks, bonded together with mortar, to create a sturdy and continuous barrier. Its monolithic nature ensures durability and robustness, resisting both compressive loads and external elements. Solid Brick Masonry Walls are constructed with typical overall wall depths of 3.63”, 7.63” (9.2, 19.4 cm) for single and double wythes. Overall heights of Solid Brick Masonry Walls are commonly between 8’-16’ (2.44-4.88 m) with wall lengths of 12’-32’ (3.66-9.75 m).

A cavity composite masonry wall integrates two distinct wythes, commonly a single brick layer and a single Concrete Masonry Unit (CMU) layer, separated by a gap or cavity. This design aims to combine the aesthetic appeal of brick with the cost-effective and versatile nature of CMU. Cavity Composite Masonry Walls are constructed with typical overall wall depths of 11.25”-15.25” (28.6-38.7 cm) and a wall cavity of 2”-4” (5.1-10.2 cm). Tie spacings are set a maximum of 36” (91 cm) horizontally and 18” (46 cm) vertically. Overall heights of Cavity Composite Masonry Walls are commonly between 8’-16’ (2.44-4.88 m) with wall lengths of 12’-32’ (3.66-9.75 m).

Curtain wall panel sizes play a crucial role in the design and performance of a building's facade. The size of each panel can significantly influence aesthetics, functionality, and structural behavior. Larger panels often create a more minimalist, seamless appearance, offering unobstructed views. Curtain Wall Panel Sizes are manufactured with a variety of sizes with panel widths between 2’-8’ (.61-2.44 m) and overall panel heights from 2’-20’ (.61-6.1 m). Glazed curtain wall panels have thicknesses between .25”-1” (6-25 mm).

The IKEA Bondis Wall Clock looks like a classic clock but comes all black with white numbers. Ideal for someone looking for a clock in their bedroom or study space, this clock is silent with no annoying ticking sound. Battery-powered, this clock is meant to be set by hand. The IKEA Bondis Wall Clock has an overall diameter of 14.96” (38 cm) and depth of 2.36” (6 cm).

A classic-looking design, the Nuffra Wall Clock is a nice, cheaper option to keep your day ticking along. Roman Numerals circle the clock with a white background and black trim. The designer of this clock is Gustav Carlsburg, who kept things simple and elegant at an affordable price. The IKEA Nuffra Wall Clock has an overall diameter of 9.84” (25 cm) and depth of 1.57” (4 cm).

The IKEA Skarig Wall Clock is a different-looking clock with a greyish tone complete with gold hands and number markings. Designed by Gustav Carlsberg, this clock offers a sleek, modern type of design great for someone looking to add a different look to their space. The IKEA Skärig Wall Clock has an overall diameter of 10.24” (26 cm) and depth of 1.77” (4.5 cm).

IKEA’s Pipskaft Wall Clock is an interesting, modern-looking design with a tiny circle and long hands to keep the time making it more than just a clock. Designed by Ida Pettersson Preutz, this clock is a definite head-turner and a great addition to any living space. The IKEA Pipskaft Wall Clock has an overall diameter of 23.23” (59 cm) and depth of 1.57” (4 cm).