BrowseAbout
Categories
☰
☰
LoginCorsa 3-Blade Ceiling FanCorsa 3-Blade Ceiling Fan
PeopleAnimalsPlantsObjectsFurnitureFixturesLayoutsBuildingsTransportSportsTechnologyCulture
X
Dimensions.com
LoginAccountProAbout
PeopleAnimalsPlantsObjects
FurnitureFixturesLayoutsBuildings
TransportSportsTechnologyCulture
BrowseTagsConvert
Fixtures
>
Fans | Ceiling Fans

Corsa 3-Blade Ceiling Fan

Corsa 3-Blade Ceiling Fan

Style and size comparison drawing of Corsa 3-Blade Ceiling Fan compared to other ceiling fansStyle and size comparison drawing of Corsa 3-Blade Ceiling Fan compared to other ceiling fans
Description
Description

The Corsa 3-Blade Ceiling fan should be used in a dry location, features reversible blades, and has a dimmable light. This ceiling fan can be operated with a remote control and can be installed on a sloped ceiling. It is perfect for medium rooms of up to 12’ x 14’ (3.7m x 4.3m), is a great way to add light and style to the room, and is available in 2 finishes.

Dimensions & Sizes
Dimensions & Sizes

The Corsa 3-Blade Ceiling Fan has a height of 11.75” (29.8 cm) and diameter of 42” (106.7 cm).

Set of dimensioned drawings of the Corsa 3-Blade Ceiling Fan with height and diameter in plan and elevation
Description
Description

The Corsa 3-Blade Ceiling fan should be used in a dry location, features reversible blades, and has a dimmable light. This ceiling fan can be operated with a remote control and can be installed on a sloped ceiling. It is perfect for medium rooms of up to 12’ x 14’ (3.7m x 4.3m), is a great way to add light and style to the room, and is available in 2 finishes.

Dimensions & Sizes
Dimensions & Sizes

The Corsa 3-Blade Ceiling Fan has a height of 11.75” (29.8 cm) and diameter of 42” (106.7 cm).

3D Model
3D Model
Common Questions
Common Questions
Fans | Ceiling Fans
+
Fans | Ceiling Fans
+
What size ceiling fan do I need?
The recommended size of a ceiling fan is dependent on the size of the room. For a room up to 75 sq. ft, the maximum diameter for the fan should be 36 inches or a range between 29”-36” (73.7-91.4 cm). Up to 175 sq. ft calls for a maximum diameter of 48 inches or a range between 42” to 48” (106.7-121.9 cm).
How do you balance a ceiling fan?
Before attempting to balance a ceiling fan, make sure the blades are not warped. If so, they will need to be replaced. Check the screws of the mounting bracket, electrical box, and fan itself and tighten them if needed. Any bent blade can be adjusted by carefully pushing up or down on the bracket. Each blade should have the same distance from its tip to the ceiling.
How do you remove a ceiling fan?
To remove a ceiling fan, first determine whether the fan is down-rod mounted or bracket mounted. For both, make sure the power is off. Remove the metal cover of the mounting bracket to clearly see the ball at the top of the fan pole. Next, remove the wire nuts of the electrical connections, hold onto the light fixture and move the ball positioned at the top of the fan pole from the mounting bracket. The final step is to remove the mounting bracket from the ceiling. For a flush mounted fan, detach the blades and undo the screws that secure the fan to the ceiling bracket. Remove the fan body then the mounting bracket.
What size ceiling fan do I need?
The recommended size of a ceiling fan is dependent on the size of the room. For a room up to 75 sq. ft, the maximum diameter for the fan should be 36 inches or a range between 29”-36” (73.7-91.4 cm). Up to 175 sq. ft calls for a maximum diameter of 48 inches or a range between 42” to 48” (106.7-121.9 cm).
How do you balance a ceiling fan?
Before attempting to balance a ceiling fan, make sure the blades are not warped. If so, they will need to be replaced. Check the screws of the mounting bracket, electrical box, and fan itself and tighten them if needed. Any bent blade can be adjusted by carefully pushing up or down on the bracket. Each blade should have the same distance from its tip to the ceiling.
How do you remove a ceiling fan?
To remove a ceiling fan, first determine whether the fan is down-rod mounted or bracket mounted. For both, make sure the power is off. Remove the metal cover of the mounting bracket to clearly see the ball at the top of the fan pole. Next, remove the wire nuts of the electrical connections, hold onto the light fixture and move the ball positioned at the top of the fan pole from the mounting bracket. The final step is to remove the mounting bracket from the ceiling. For a flush mounted fan, detach the blades and undo the screws that secure the fan to the ceiling bracket. Remove the fan body then the mounting bracket.
Household Fixtures
+
Household Fixtures
+
What items are considered fixtures in residential property?
Items considered fixtures in a residential property are items that are part of the house or apartment which are permanent and service the people living within the residence. An item is considered a fixture if it is affixed to the ceiling, floor, or wall through screws, cements, pipes, nails or glue. Examples of fixtures are built-in bookcases, plumbing, ceiling lights, wall mounted shelving, washers, dryers and awnings.
What are the required fixtures in a residential building?
Generally, the required fixtures in a residential building are fitted kitchen units, cupboards, ovens and sinks. Other required fixtures are bathroom sinks, faucets, tubs, central heating systems, and dishwashers. Typically the fixtures are either defined on the deed of the property, or apartment lease.
How often should household fixtures be replaced or upgraded?
How often a household fixture should be replaced depends on the type of fixture. Washing machines should be replaced every 8 to 12 years. The HVAC system typically lasts 15 to 20 years. Water heaters older than 10 years should be replaced. Generally, faucets will need to be replaced every 15 years, and most sinks will stay in working condition for 50 years.
What items are considered fixtures in residential property?
Items considered fixtures in a residential property are items that are part of the house or apartment which are permanent and service the people living within the residence. An item is considered a fixture if it is affixed to the ceiling, floor, or wall through screws, cements, pipes, nails or glue. Examples of fixtures are built-in bookcases, plumbing, ceiling lights, wall mounted shelving, washers, dryers and awnings.
What are the required fixtures in a residential building?
Generally, the required fixtures in a residential building are fitted kitchen units, cupboards, ovens and sinks. Other required fixtures are bathroom sinks, faucets, tubs, central heating systems, and dishwashers. Typically the fixtures are either defined on the deed of the property, or apartment lease.
How often should household fixtures be replaced or upgraded?
How often a household fixture should be replaced depends on the type of fixture. Washing machines should be replaced every 8 to 12 years. The HVAC system typically lasts 15 to 20 years. Water heaters older than 10 years should be replaced. Generally, faucets will need to be replaced every 15 years, and most sinks will stay in working condition for 50 years.
Details
Details

*Under Development*

Height:
11.75” | 29.8 cm
Width:
42” | 106.7 cm
Depth:
42” | 106.7 cm
Length:
:
:
Weight:
12.2 lb | 5.5 kg
Area:
:

Power: 60 W

Materials:
Manufactured wood blades; frosted glass shade; metal support
Designer:
Mercury Row
:

Drawings include:
Corsa 3-Blade Ceiling Fan side elevation, plan

Links
Links

AllModern - Corsa 3-Blade Ceiling Fan

Wikipedia - Ceiling Fan

Related Collections
Related Collections
Fans | Ceiling Fans
Household Fixtures
Related Tags
Related Tags
Living Rooms
Updated on
October 26, 2023
Guides
Guides

2D Downloads

For 2D Downloads of this element, upgrade to a Dimensions Pro Membership. Available in DWG (CAD, Imperial & Metric), SVG, JPG formats
For 2D Downloads of this element, renew your Dimensions Pro Membership. Available in DWG (CAD, Imperial & Metric), SVG, JPG formats

3D Downloads

For 3D Downloads of this element, upgrade to a Dimensions Pro Membership. Available in 3DM (Rhino), OBJ (NURB), SKP (Sketchup) formats
For 3D Downloads of this element, renew your Dimensions Pro Membership. Available in 3DM (Rhino), OBJ (NURB), SKP (Sketchup) formats
Ad Blocker
Enjoy free drawings? We do too! 
Advertising helps fund our work.
Please support the project by disabling
or whitelisting your ad blocker while browsing Dimensions.Guide. Thanks!